SECONDHAND

None secondhand at the moment.

NEW

Alto APM Series

Amazing prices while stock lasts!!

The APM series offers excellent sound quality and powerful amplification in a compact flatbed format.

The APM120 (pictured) is 500 watts per channel at 4 ohms; 8 XLR's plus 2 stereo input channels; 3 aux sends plus internal fx, each having its own return fader. Features include swept midband EQ. PFL and mute switching. Switchable phantom power in groups of four.

APM160 - as above except 12 XLR's and 750 watts x 2 @ 4 ohms

APM200 - as above except 16 XLR's; 2 effects processors and two independent stereo amplifiers: 750 watts x 2 @ 4 ohms and 500 watts x 2 @ 4 ohms (total 2500 watts!). The separate amplifiers are ideal for use in front of house/monitoring configuration or subwoofers/mids+tops.

APM120
rrp £699
our price
£549

APM160
rrp
£918
our price
£599

APM200
rrp
£1122
our price
£799

Yamaha EMX 5016CF

Top of the range with extensive feature set.                                                               Compact and lightweight (11Kg)

500 watts per channel @ 4ohms

Dual SPX processors

Rackable

See full spec. at Yamaha site

£call

Yamaha EMX 5014C

If your sound reinforcement requirements are getting serious, but you still want the convenience and reliable performance of a Yamaha powered mixer, check out the console-style EMX5014C. Here’s an all-in-one solution that will appeal to bands and venue operators alike. The EMX5014C transports and sets up with the ease of systems built around the smaller EMX-series powered mixers, but will also prove it’s worth in more permanent installations. It can even be rack-mounted for vertical or angled operation, and real space savings! But of course the EMX5014C offers much more than just convenience. It provides a surprising palette of features and versatile signal routing options that can take your live sound to the next level. And it’s a Yamaha, so you know it’s going to sound great.

See full spec. at Yamaha site

£649

KAM KMD20

500 watts per channel into 4 Ohms. 14 inputs - 6 XLR mono channels,  4 pairs of stereo jack channels, 24-bit effects processor, 4-band EQ on each channel, 7-band master graphic EQ. Alt 3/4 outputs and PFL/Solo switching.

Separate power supplies for the mixer stage and the amplifier stage, allowing flexible use as a passive mixer too. Great value.

rrp £599

our price
£549

Peavey XR8300

£439

£469

Yamaha EMX312SC

£369

PORTABLE SYSTEMS

Alto PBM4D Sistema

£199

Alto OEX400

350W (EIAJ) total power
10" (254mm.) speakers
8 channel mixer, with wide choice of balanced/unbalanced input options
16 preset Internal Digital Effects section, including effects combination
Lightweight, interlocking components for luggage style transportation
Three helpful handles (one for each speaker and one for the main unit) allow easy carrying.
Ideal compact portable audio system

Mixer Section:
Microphone Inputs: Balanced XLR
Line Inputs: Balanced/unbalanced, 1/4" TRS jack
Tape Inputs: Unbalanced RCA jack
Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
DSP Section: 24-bit HALL, ROOM, VOCAL, PLATE, STEREO DELAY, REV+DELAY, and REV+CHORUS
Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level
Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3mm.)
MONITOR OUT jack

Speakers:
Continuous Power: 150W AES Standard (each speaker)
Peak Power: 300W Peak (each speaker)
Protection: Electronic circuit on driver
Speaker specifications: 10" (254mm.) Low Frequency Driver
/ 2" (50.8mm.) Voice Coil
1" (25.4mm.) Neodymium High
Frequency Driver / 1" (25.4mm.) Voice Coil
Input connectors: 1/4" (6.3mm) mono (TS) jack on each cabinet

Amplifier Section:
Output Power: 300W (RMS) 350W (EIAJ)
Impedance: 4 Ohms
Protections: Overload / Short Circuit / Soft Clip Limiter /
Thermal Protection Fan Cooling

Standard Package:
2 speaker cables
1 power cord
2 microphone cables
Stands: F-8 or F-3 are not included

£399